The XMC 1200 SPLINE 30 is the ultimate all mountain wheel. A carbon
layup specifically tuned for all mountain use makes the rim tough yet
super-light. And with a 30 mm internal width, it is made for wide
rubber. The hubs feature the latest incarnation of our Ratchet System.
Extremely refined machining and fully lasered graphics make them the
lightest hubs DT Swiss has ever made. Together with bladed top-end
spokes and perfect DT Swiss build quality, this wheelset is made to ride
trails with speed and confidence.
We believe in the art of engineering and strive for sophistication in the product development process. Our guiding idea is to constantly push barriers with our inhouse developed technologies.
Looking for conversion options, spare parts, manuals or how-to videos? Visit our product support.
Find help and answers for frequently asked questions here.
Extended guarantee conditions for Carbon Wheels
According to your selection XMC 1200 SPLINE® we found 4 models. Please use the model finder above to narrow down the models. Select the model for which you need product support.
Find help and answers for frequently asked questions here.
The current DT Swiss wheels are tubeless-ready and come with mounted tubeless rim tape and corresponding valves. For conversion, you will need a tubeless-capable tire (optimal: UST) and tire sealant. You can find both at an official dealer. Our How To video will take you through step-by-step assembly.
If you have previously ridden your bike with a tube or if the tape no longer sticks properly to the rim, we recommend that you replace the rim tape as a precaution.
How to attach the tubeless rim tape:
1. Measure the inside width of the rim.
2. The tubeless rim tape should be approx. 2 mm wider than the rim and can be bought from a specialist store.
3. Apply the tubeless rim tape. Depending on the rim/tire combination, it may be helpful to apply two or three layers of tubeless rim tape to optimally seal the rim bed.
Play
Under Product Support, you will find exact details of all conversion options for your product (wheel, hub). First go to Product Support and select your product using the DT Swiss ID or filter. Under "Conversion" you will find the exact details for all conversion options. You will also find helpful How To videos and manuals.
At temperatures of 200 degrees, carbon will start to wave and lose its stability.
The exhaust gases from a car can be up to 500 degrees Celsius. When transporting your carbon wheel with a rear carrier, make sure that there is sufficient distance to avoid such defects!
Contact the manufacturer of your rear carrier for a protective device.
If you discover this deformation on your wheel, contact our Service Centre.
DT Swiss sells its products exclusively via official dealers, some of which also have online shops. Please contact your dealer. Or contact the distributor for your country – please use the contact form and select your country first, followed by "Product availability" as the subject.
Unfortunately we don't offer discounts; we don't sell directly to private customers. Please contact a dealer. You can find recommended retail prices on our website.
By buying a DT Swiss carbon wheel, you will benefit from the Fair Share Policy which allows you to profit from a crash replacement service for your wheels, available for 10 years after purchase.
«XMC 1200 SPLINE is the top of the line MTB wheel from DT Swiss. With 180 Ratchet EXP hubs, the wheel is smooth, strong and reliable, there’s no doubt about it.»
Ride Review
by Ryan Walsch
«The XMC 1200s are very quiet to ride. Stiff, yet compliant enough to deaden out big hits and trail chatter leaving you able to hear your tyres doing their job.»
Zoom image
Zoom image
Zoom image
Zoom image
